Oak Driveway Gates Framed, Ledged & Braced Mortice & Tenoned

Oak Driveway Gates Framed, Ledged & Braced Mortice & Tenoned

£1,729.06 inc. VAT

Hardwood Driveway Gate Height *

Hardwood Driveway Gate Width *

Bespoke Size (H X W)

Bespoke Size Option *

Oak Posts *

Gate Fitting Pack *

Delivery Quote Calculated at Checkout Side Banner



Mortice & Tenoned Oak Driveway Gates

All timber is untreated and will require a wood preservative before installation 

You Will Receive a Pair of Oak Driveway Gates Only (No Posts Or Ironwork)

If you are going to fit the gates with underground automation you need to ensure that you select the option for a visible flush bottom rail priced at £200

The final two photos on this listing shows an oak gate with a flush bottom rail and an oiled oak gate

Manufactured From:

70mm x 95mm Stiles and Top Rail 

38mm x 95mm Mid Rail, Bottom Rail and Bracing

All joints are Mortice & Tenoned plus dowelled for strength 

All Rails and bracing is 9 degreed to shred water off

21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)

Height Up to the Top of Rail in picture is 1800mm, with Decorative Horn which is an additional 4″(100mm)
On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each
(Picture shown is a 3600mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary)
These gates can be made to measure, if you require a bespoke size then please ensure that you order the size above what you require and enter you sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.

Additional information

Weight 0.00000000 kg


Juke's Timber Solutions


There are no reviews yet.

Be the first to review “Oak Driveway Gates Framed, Ledged & Braced Mortice & Tenoned”