- Nationwide Delivery
- Top Quality Materials & Finish
- Made To Order
- Bespoke Options Available
Loading...
Description
Framed, Ledged & Braced, Mortice & Tenoned Iroko Driveway Gates
Swan Neck Round Palisade Style
All timber is untreated and will require a wood preservative before installation
You Will Receive a Pair of Iroko Driveway Gates Only (No Posts Or Ironwork)
Specification of these gates is as follows;
- Iroko
- 70mm x 120mm Stiles, Mid Rail and Head
- 45mm x 95mm Bracing
- 70mm x 145mm Bottom Rail
- 60mm x 60mm Spindles with 30mm radius Chamfer
- All joints are Mortice & Tenoned plus dowelled for strength
- All Rails and bracing is 9 degreed to shred water off
- 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)
- Height Up to the Top of Rail is 1200mm(4ft)/1500mm(5ft)/1800mm(6ft) lowest point, with Decorative Horn which is an additional 5″(125mm) Plus rise up to 350mm
The Spindles are 1/3 and the Board is 2/3 of the height of the gate approximately
On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each
These gates can be made to measure, if you require a bespoke size then please ensure that you order the size above what you require and enter you sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.
Additional information
Weight | 0.00000000 kg |
---|
Brand
Juke's Timber Solutions
Be the first to review “Iroko Swan Neck Palisade Driveway Gates Mortice & Tenoned” Cancel reply
Reviews
There are no reviews yet.