Oak Bow Top Driveway Gates Framed, Ledged & Braced, Mortice & Tenoned
£2,216.92 inc. VAT
Mortice & Tenoned Oak Driveway Gates Bow Top Style
All timber is untreated and will require a wood preservative before installation (picture show is treated).
You will receive a pair of oak driveway gates only (no posts or ironwork unless selected when ordering).
If you are going to fit the gates with underground automation you need to ensure that you select the option for a visible flush bottom rail priced at £350.
The final three drawings on this listing show the gates with a visible flush bottom rail.
Manufactured from:
- 70mm x 95mm Stiles and Head
- 38mm x 95mm Top Rail, Mid Rail, Bottom Rail and Bracing
- All joints are Mortice & Tenoned plus dowelled for strength
- All Rails and bracing is 9 degreed to shred water off
- 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)
Height up to the top of rail on the photo is 1800mm lowest point for 6ft gates, with decorative horn which is an additional 4″(100mm) Plus rise up to 350mm.
On these oak driveway gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each.
(Picture shown is a 3300mm wide set of gates. Board quantity may vary on different width gates. Colour and knot content may vary).
These gates can be made to measure. If you require a bespoke size then please ensure that you order the size above what you require and enter your sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.
- Nationwide Delivery
- Top Quality Materials & Finish
- Made To Order
- Bespoke Options Available
If you have any questions or would prefer to order over the phone just call us on the number below
Related products
Driveway Gates Ironwork Packs
Mortice & Tenoned Oak Driveway Gates Bow Top Style
All timber is untreated and will require a wood preservative before installation (picture show is treated).
You will receive a pair of oak driveway gates only (no posts or ironwork unless selected when ordering).
If you are going to fit the gates with underground automation you need to ensure that you select the option for a visible flush bottom rail priced at £350.
The final three drawings on this listing show the gates with a visible flush bottom rail.
Manufactured from:
- 70mm x 95mm Stiles and Head
- 38mm x 95mm Top Rail, Mid Rail, Bottom Rail and Bracing
- All joints are Mortice & Tenoned plus dowelled for strength
- All Rails and bracing is 9 degreed to shred water off
- 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)
Height up to the top of rail on the photo is 1800mm lowest point for 6ft gates, with decorative horn which is an additional 4″(100mm) Plus rise up to 350mm.
On these oak driveway gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each.
(Picture shown is a 3300mm wide set of gates. Board quantity may vary on different width gates. Colour and knot content may vary).
These gates can be made to measure. If you require a bespoke size then please ensure that you order the size above what you require and enter your sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.
Description
Mortice & Tenoned Oak Driveway Gates Bow Top Style
All timber is untreated and will require a wood preservative before installation (picture show is treated).
You will receive a pair of oak driveway gates only (no posts or ironwork unless selected when ordering).
If you are going to fit the gates with underground automation you need to ensure that you select the option for a visible flush bottom rail priced at £350.
The final three drawings on this listing show the gates with a visible flush bottom rail.
Manufactured from:
- 70mm x 95mm Stiles and Head
- 38mm x 95mm Top Rail, Mid Rail, Bottom Rail and Bracing
- All joints are Mortice & Tenoned plus dowelled for strength
- All Rails and bracing is 9 degreed to shred water off
- 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)
Height up to the top of rail on the photo is 1800mm lowest point for 6ft gates, with decorative horn which is an additional 4″(100mm) Plus rise up to 350mm.
On these oak driveway gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each.
(Picture shown is a 3300mm wide set of gates. Board quantity may vary on different width gates. Colour and knot content may vary).
These gates can be made to measure. If you require a bespoke size then please ensure that you order the size above what you require and enter your sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.
Additional information
| Weight | 0.00000000 kg |
|---|