Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned 6FT

Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned

£2,249.86 inc. VAT

Hardwood Driveway Gate Height *

Hardwood Driveway Gate Width *

Bespoke Size (H X W)

Bespoke Size Option *

Oak Posts *

Gate Fitting Pack *

Delivery Quote Calculated at Checkout Side Banner




Mortice & Tenoned Oak Driveway Gates

Swan Neck Style

All timber is untreated and will require a wood preservative before installation

You Will Receive a Pair of Oak Driveway Gates Only (No Posts Or Ironwork)

If you are going to fit the gates with underground automation you need to ensure that you select the option for a visible flush bottom rail priced at £350

The final two photos on this listing shows this gate with a flush bottom rail and an oiled oak gate


Manufactured From:

70mm x 95mm Stiles and Head

38mm x 95mm Top Rail, Mid Rail, Bottom Rail and Bracing

All joints are Mortice & Tenoned plus dowelled for strength 

All Rails and bracing is 9 degreed to shred water off

21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)

For 6ft Gates – Height Up to the Top of Rail is 1800mm lowest point, with Decorative Horn which is an additional 4″(100mm) Plus rise up to 350mm 
On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each
(Picture shown is a 3000mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary)
These gates can be made to measure, if you require a bespoke size then please ensure that you order the size above what you require and enter you sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.


Additional information

Weight 0.00000000 kg


Juke's Timber Solutions


There are no reviews yet.

Be the first to review “Wooden Oak Swan Neck Driveway Gates Mortice & Tenoned”