Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned 5ft 1500mm

Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned

£2,198.36 inc. VAT

Hardwood Driveway Gate Height *

Hardwood Driveway Gate Width *

Oak Posts *

Gate Fitting Pack *

Delivery Quote Calculated at Checkout Side Banner



Heavy Duty Mortice & Tenoned Oak Driveway Gates

Swan Neck Round Palisade Style

All timber is untreated and will require a wood preservative before installation

You Will Receive a Pair of Oak Driveway Gates Only (No Posts Or Ironwork)

The final photo on this listing show an oiled palisade oak gate

If you are using your gate with underground automation you need to ensure that you select the option for a flush bottom rail priced at £350

Manufactured From:


European Oak

70mm x 120mm Stiles, Mid Rail and Head 

45mm x 95mm Bracing

70mm x 145mm Bottom Rail

60mm x 60mm Spindles with 30mm radius Chamfer

All joints are Mortice & Tenoned plus dowelled for strength 

All Rails and bracing is 9 degreed to shred water off

21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)

Height Up to the Top of Rail is 1500mm lowest point, with Decorative Horn which is an additional 5″(125mm) Plus rise up to 350mm 
The Spindles are 1/3 and the Board is 2/3 of the hight of the gate approximately
 On these Oak Driveway Gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each
(Picture shown is a 3900mm wide set of gates Board Quantity may vary on different width gates, Colour and Knot content may vary)

These gates can be made to measure, if you require a bespoke size then please ensure that you order the size above what you require and enter you sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.

Additional information

Weight 0.00000000 kg


Juke's Timber Solutions


There are no reviews yet.

Be the first to review “Oak Swan Neck Palisade Driveway Gates Mortice & Tenoned”