Oak Inverted Swan Neck Palisade Driveway Gates Mortice & Tenoned
£2,264.31 inc. VAT
Heavy Duty Mortice & Tenoned Oak Driveway Gates Inverted Swan Neck Round Palisade Style
All timber is untreated and will require a wood preservative before installation.
You will receive a pair of oak driveway gates only (no posts or ironwork unless selected when ordering).
4ft, 5ft and 6ft heights available to purchase. Please note that the photos that show the back of the gates without a mid rail are the 4ft high gates, as they don’t have one.
There is a £350 visible flush bottom rail option, please ensure you select this if the gates will be underground automated as they require this option, the last five photos show the gates with a visible flush bottom rail.
Manufactured from:
- European Oak
- 70mm x 120mm Stiles, Mid Rail and Head
- 45mm x 95mm Bracing
- 70mm x 145mm Bottom Rail
- 60mm x 60mm Spindles with 30mm radius Chamfer
- All joints are Mortice & Tenoned plus dowelled for strength
- All Rails and bracing is 9 degreed to shred water off
- 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)
Height up to the top of rail is 1200mm/1500mm/1800mm at lowest point, with eecorative horn which is an additional 5″(125mm) Plus rise up to 350mm.
The spindles are 1/3 and the board is 2/3 of the height of the gate approximately.
On these oak driveway gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each.
(Picture shown is a 3900mm wide set of gates. Board quantity may vary on different width gates. Colour and knot content may vary).
These gates can be made to measure. If you require a bespoke size then please ensure that you order the size above what you require and enter your sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.
- Nationwide Delivery
- Top Quality Materials & Finish
- Made To Order
- Bespoke Options Available
If you have any questions or would prefer to order over the phone just call us on the number below
Related products
Driveway Gates Ironwork Packs
Heavy Duty Mortice & Tenoned Oak Driveway Gates Inverted Swan Neck Round Palisade Style
All timber is untreated and will require a wood preservative before installation.
You will receive a pair of oak driveway gates only (no posts or ironwork unless selected when ordering).
4ft, 5ft and 6ft heights available to purchase. Please note that the photos that show the back of the gates without a mid rail are the 4ft high gates, as they don’t have one.
There is a £350 visible flush bottom rail option, please ensure you select this if the gates will be underground automated as they require this option, the last five photos show the gates with a visible flush bottom rail.
Manufactured from:
- European Oak
- 70mm x 120mm Stiles, Mid Rail and Head
- 45mm x 95mm Bracing
- 70mm x 145mm Bottom Rail
- 60mm x 60mm Spindles with 30mm radius Chamfer
- All joints are Mortice & Tenoned plus dowelled for strength
- All Rails and bracing is 9 degreed to shred water off
- 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)
Height up to the top of rail is 1200mm/1500mm/1800mm at lowest point, with eecorative horn which is an additional 5″(125mm) Plus rise up to 350mm.
The spindles are 1/3 and the board is 2/3 of the height of the gate approximately.
On these oak driveway gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each.
(Picture shown is a 3900mm wide set of gates. Board quantity may vary on different width gates. Colour and knot content may vary).
These gates can be made to measure. If you require a bespoke size then please ensure that you order the size above what you require and enter your sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.
Description
Heavy Duty Mortice & Tenoned Oak Driveway Gates Inverted Swan Neck Round Palisade Style
All timber is untreated and will require a wood preservative before installation.
You will receive a pair of oak driveway gates only (no posts or ironwork unless selected when ordering).
4ft, 5ft and 6ft heights available to purchase. Please note that the photos that show the back of the gates without a mid rail are the 4ft high gates, as they don’t have one.
There is a £350 visible flush bottom rail option, please ensure you select this if the gates will be underground automated as they require this option, the last five photos show the gates with a visible flush bottom rail.
Manufactured from:
- European Oak
- 70mm x 120mm Stiles, Mid Rail and Head
- 45mm x 95mm Bracing
- 70mm x 145mm Bottom Rail
- 60mm x 60mm Spindles with 30mm radius Chamfer
- All joints are Mortice & Tenoned plus dowelled for strength
- All Rails and bracing is 9 degreed to shred water off
- 21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)
Height up to the top of rail is 1200mm/1500mm/1800mm at lowest point, with eecorative horn which is an additional 5″(125mm) Plus rise up to 350mm.
The spindles are 1/3 and the board is 2/3 of the height of the gate approximately.
On these oak driveway gates as an example if you order a 2400mm wide pair you will receive two gates at 1200mm wide each.
(Picture shown is a 3900mm wide set of gates. Board quantity may vary on different width gates. Colour and knot content may vary).
These gates can be made to measure. If you require a bespoke size then please ensure that you order the size above what you require and enter your sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.
Additional information
| Weight | 0.00000000 kg |
|---|