Softwood Flat Top 1/3 2/3 Split Palisade Driveway Gates Mortice & Tenoned

1/3 2/3 Split Palisade Mortice & Tenoned Softwood Driveway Gates

All timber is untreated and will require a wood preservative before installation

You Will Receive a Pair of Softwood Driveway Gates Only (No Posts Or Ironwork unless selected when ordering)

If you are going to fit the gates with underground automation you need to ensure that you select the option for a visible flush bottom rail priced at £150

The final six photos on this listing show the gates with a visible flush bottom rail

These gates can either have 1/3 on the left or the right, the drawings on the listing show both options, please select when ordering

Manufactured From:

70mm x 95mm Stiles and Top Rail

38mm x 95mm Mid Rail, Bottom Rail and Bracing

All joints are Mortice & Tenoned plus dowelled for strength

All Rails and bracing is 9 degreed to shred water off

45mm x 70mm Spindles with 45 degree Chamfer

21mm Tongue and groove boards with v-groove (which are glued and secret pinned with stainless pins)

Height Up to the Top of Rail in picture is 1800mm, with Decorative Horn which is an additional 4″(100mm)

These gates can be made to measure, if you require a bespoke size then please ensure that you order the size above what you require and enter you sizes into the bespoke size box. If you would like to talk to someone direct feel free to contact us.